1. Due to the rapid development of productivity, in order to better meet the needs of high-tech development, the demand for quality of products in related fields is also rising. All fields hope to select high-quality goods to manufacture products with higher precision. In order to meet this market demand, precision machining needs to adjust product quality from its own consideration.

2. Nowadays, all major industries hope that the relevant machines can be smaller to fully ensure that the total area is still small. However, they do not expect that the original application effect of the goods will be affected. Therefore, precision machining still needs to be changed from the precision level, so as to reduce the size of the parts, ensure that the total area of the machine and equipment produced is still small, and the surface quality needs to be more considerate.

3. When using the machine, the company expects that the rolling bearings and other machinery and equipment can bear appropriate weight, and at the same time, they also need to make relative movement to reduce the surface roughness of the surface layer, thus improving the wear resistance of the parts. Therefore, when manufacturing properly, we should certainly improve the quality and reliability.

4. Because the improvement of the motion precision of the machine can change the fluctuation, jitter and noise of the physical performance, the field has become more and more interested in product characteristics.

How to make the surface more smooth in precision machining

1. Put these parts that have been precision machined into the barrel with grinding blocks or grinding agents, and you will have a lot of complicated movements in the room, and the working pressure will also be generated during the movement, which will cause the working pressure to impact and extrude, so that the surface of the parts will have a light cutting effect, and naturally you can slowly optimize its surface, and the surface will become more and more molded, However, when selecting the grinding block and grinding agent, we must see which one should be selected according to the specific conditions of the parts, and at the same time, we must pay attention to the number of the selected preparation, so as to ensure the cutting effect to a large extent.

2. In addition to the repair of precision machined parts in this way, the burr will also be repaired. When dealing with the burr, use the machine equipment such as a knife and sandpaper, which can better remove the relevant burr. However, this method of grinding and polishing consumes more human and material resources.